In 1998, I started selling the plans for my original RC airplane designs.  At first, all I was doing was sending out plans to those of you who wanted to build a plane from scratch.  Then I began to receive requests from modelers who wanted more and they wondered if I had kits available.  The number of these requests has continued to climb so I've decided to offer kits on a limited bases for right now.  I have developed two 'short kits' for two of my designs.  As short kits, the builder will have to get some additional balsa and plywood to complete the project.  This consist primarily of 1/16" balsa sheeting for the wing cores, fuselage decks and access hatches.  You're free from the hassle of cutting all the major pieces.  I've cut them for you!
All parts are 'jig cut' from balsa and plywood.

The kit is shown at the right. Photo may vary slightly from actual.
You get:  all the formers, fuse sides, a set of foam wing cores, fins, hardwood wing spar, stabilizer and elevator, and some triangle pieces.

In addition to the kit, you also receive step by step instructions, construction photos, and a full size building sheet with templates you can use to cut other parts.